Search
Shop By Make
    Menu Close

    HKS Carbon Cold Air Intake System - 2022+ BRZ/GR86

    SKU: HKS-70026-AT012
    Manufacturer: HKS
    Fits FA24 flat-four on 2022+ Toyota GR86 and Subaru BRZ

    Available end of February!
    MSRP: $1,550.00
    $1,250.00
    i h

    *Fast Shipping *Buy Now and Pay Later

    *Authorized Dealer *Safe Purchases

    *Outstanding Customer Service A+++

    NOTE: Cannot be used together with the HKS GT2 SUPERCHARGER

     

    ●Cold Air Intake Box
     To improved intake efficiency, the air cleaner features the traditional high performance “Super Power Flow (D150-80, wet
    type, 2 layers)”
     By containing the Super Power Flow inside in the box, this helps reduce the effect of hot air in the engine compartment
    and stabilizes intake air temperature at a lower level.
     The air flow meter is in the same position as stock to comply with the factory control. An additional second intake duct
    has been added to reduce airflow resistance during intake.
     The upper case of the box is clear smoke colored that complements the engine compartment, while nonchalantly
    showing off the Super Power Flow.


    ●Carbon Suction Pipe

    *3K: 3,000 Carbon Fibers
    *Prepreg: Heat cured resin containing fibers in advance
    * UD: Single-direction carbon fiber. UD achieves high strength
    by laminating multiple sheets in different stacking orientations.

     High temperature resistant silicone hose are used for connection to the intake box. The smooth internal surface reduces
    intake resistance, while the internal core wire suppress deformation and improves reliability.

    Using the hot press method, the surface is made of 3K*
    twill weave carbon prepreg* while using UD* prepreg on
    the inside.
     The curing process is performance by using a silicon bag
    on the inside of the pipe at high pressure and high
    temperature. As a result, high strength is achieved in
    addition to a smooth inner surface. Air flows smoothly
    while retaining sufficient strength.

    ●Air Intake Duct

     A one-piece molded construction without internal seams was adopted, to reduce intake resistance.
     Aiming to reduce resistance at maximum flow rate, the narrowest section diameter is D87.5mm, while the factory
    diameter is D50mm.
     Due to the same layout as the factory unit, it does not absorb rainwater and can be used safely on the street.

     

    Includes: 

    • cold air intake box
    • ait intake duct
    • carbon fiber suction pipe

    Features:

    • carbon fiber intake piping
    • enlarged air inlet
    • enclosed intake box
    • red or green suction filter
    • integrated sound tube
    • ideal for increased horsepower, torque, and style

    FITS:

    2022+ BRZ/GR86

    0.0 0
    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *

    NOTE: Cannot be used together with the HKS GT2 SUPERCHARGER

     

    ●Cold Air Intake Box
     To improved intake efficiency, the air cleaner features the traditional high performance “Super Power Flow (D150-80, wet
    type, 2 layers)”
     By containing the Super Power Flow inside in the box, this helps reduce the effect of hot air in the engine compartment
    and stabilizes intake air temperature at a lower level.
     The air flow meter is in the same position as stock to comply with the factory control. An additional second intake duct
    has been added to reduce airflow resistance during intake.
     The upper case of the box is clear smoke colored that complements the engine compartment, while nonchalantly
    showing off the Super Power Flow.


    ●Carbon Suction Pipe

    *3K: 3,000 Carbon Fibers
    *Prepreg: Heat cured resin containing fibers in advance
    * UD: Single-direction carbon fiber. UD achieves high strength
    by laminating multiple sheets in different stacking orientations.

     High temperature resistant silicone hose are used for connection to the intake box. The smooth internal surface reduces
    intake resistance, while the internal core wire suppress deformation and improves reliability.

    Using the hot press method, the surface is made of 3K*
    twill weave carbon prepreg* while using UD* prepreg on
    the inside.
     The curing process is performance by using a silicon bag
    on the inside of the pipe at high pressure and high
    temperature. As a result, high strength is achieved in
    addition to a smooth inner surface. Air flows smoothly
    while retaining sufficient strength.

    ●Air Intake Duct

     A one-piece molded construction without internal seams was adopted, to reduce intake resistance.
     Aiming to reduce resistance at maximum flow rate, the narrowest section diameter is D87.5mm, while the factory
    diameter is D50mm.
     Due to the same layout as the factory unit, it does not absorb rainwater and can be used safely on the street.

     

    Includes: 

    • cold air intake box
    • ait intake duct
    • carbon fiber suction pipe

    Features:

    • carbon fiber intake piping
    • enlarged air inlet
    • enclosed intake box
    • red or green suction filter
    • integrated sound tube
    • ideal for increased horsepower, torque, and style

    FITS:

    2022+ BRZ/GR86