NOTE: This kit was developed for the front fascia of the BRZ only, and a GR86 one is available here.

"The Verus Engineering Full Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using a 3D printed carbon nylon inlet in place of the OEM radiator guides, a well-formed duct in the inner fender line, and a stainless backing plate with carbon ducting air to the center of the rotor, this is the brake cooling kit to have. The kit comes with everything necessary for an install, including pre-cut hoses.  The OEM washer fluid reservoir *cannot be* retained!

During the design process; we utilized in-house scan data to design the components. This resulted in a product that features a near OEM fit and finish. This kit is specific to the 2022+ BRZ front bumper and steering knuckle." - Verus Enginnering

Included:

• Backing Plate Incl. Carbon Ducts Riveted On (2, LH and RH)
• 2.5" Pre-Cut Silicone High Temp Brake Hose (2)
• 3.0" Pre-Cut Silicone High Temp Brake Hose (2)
• 3.0" Stainless Hose Clamp (4)
• 2.5" Stainless Hose Clamp (4)
• Fender Pancake Duct (2)
• 3D Printed Carbon Nylon Inlet Duct (2)
• Pancake Duct Bracket (2)
  
• Hardware Kit, Includes All Necessary Pieces to Install Kit Seamlessly

Fits:

2022+ Subaru BRZ