Search
Shop By Make
    Menu Close

    RADIUM CATCH CAN KIT, CCV, MK5 SUPRA 20-0750

    Manufacturer: Radium Engineering
    $299.95
    i h

    *Fast Shipping *Buy Now and Pay Later

    *Authorized Dealer *Safe Purchases

    *Outstanding Customer Service A+++

     

    The CCV catch can mounts to 2 holes on the front radiator support. It was designed specifically to clear strut braces. This location mounts the catch can far forward to help prevent any interference with aftermarket parts such as an upgraded turbocharger or intake tubing. To retain factory functionality, the CCV catch can runs inline between the crankcase vent (CCV) port and the intake pipe. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. This oil accumulation would spread and be found in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. The CCV catch can captures this and promotes clean filtered air back into the intake.

     

    INCLUDES

     

    • Baffled oil catch can

    • MK5 Supra specific mounting bracket

    • AN adapter fittings and hose ends

    • Stainless steel hardware

    • Radium PCV hose

     

    NOTES

     

    • The CCV catch can kit does NOT address blow-by from the PCV side of the crankcase.

    • The CCV catch can kit is compatible and recommended to be used with the PCV catch can kit. See 20-0749 above or order 20-0751 dual catch can kit.

    0.0 0
    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *

     

    The CCV catch can mounts to 2 holes on the front radiator support. It was designed specifically to clear strut braces. This location mounts the catch can far forward to help prevent any interference with aftermarket parts such as an upgraded turbocharger or intake tubing. To retain factory functionality, the CCV catch can runs inline between the crankcase vent (CCV) port and the intake pipe. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. This oil accumulation would spread and be found in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance. The CCV catch can captures this and promotes clean filtered air back into the intake.

     

    INCLUDES

     

    • Baffled oil catch can

    • MK5 Supra specific mounting bracket

    • AN adapter fittings and hose ends

    • Stainless steel hardware

    • Radium PCV hose

     

    NOTES

     

    • The CCV catch can kit does NOT address blow-by from the PCV side of the crankcase.

    • The CCV catch can kit is compatible and recommended to be used with the PCV catch can kit. See 20-0749 above or order 20-0751 dual catch can kit.